About MPM Standard Machines Inventory/Refurbished Contact Us

Model 45 Injection Molding Machine Model 45 Description Bench top, pneumatically-operated small injection molding machine Manual or semi-automatic vertical clamping and injection Uses self-clamping V-mold technology Plunger-type plasticizing system available in a variety of plunger diameters Plungers can be interchanged in minutes to offer maximum flexibility Material hopper specifications Made of aluminum or optional stainless steel 12 lb. capacity Automatically meters material during the machine cycle Includes shut off and dump tube Requirements 2HP air compressor with a minimum of 80 PSI output Power Options 120V, single phase 220V, single phase Model 45 Specs Specifications Plunger Diameter (Inches) Injection Volume (Inches3) Injection Pressure @ 125PSI Air Pressure (PSI) Max Shot Size (oz) 1/2 5/8 3/4 7/8 1 - 1/16 1.178 1.841 2.651 3.608 5.304 32,000 20,480 14,223 10,449 7,068 0.33 0.50 0.75 1.00 1.50 Cylinder Heater Capacity 1,050 Watts Nozzle Heater Capacity 150 Watts Injection Cylinder Bore 8.0 Inches Injection Cylinder Stroke 6.0 Inches Approx. Maximum Clamp Force 11.75 Tons Maximum Casting Area 6.0 in2 Mold Ejection Force 6,098 Pounds Hopper Capacity 12 Pounds Standard Mold Size (LxWxH) 7 x 2 x 3 Inches Rated Current @ 120VAC 10 Amps Compressed Air Req'd Per Cycle @ 100PSI 2.56 ft3 Approx. Machine Shipping Weight 415 Pounds Machine Footprint (W x D) 18 x 25 Inches (Specifications may change without notice) Model 45 Media Pictures Front View Front View - Mo... Main Cylinder Operator Panel Electrical Encl... Back Side Pneumatic Value Optional Stand Back View of Ma... Back Left Side ...   Movies Automatic Cycle   Mold Cycle   Purging