About MPM Standard Machines Inventory/Refurbished Contact Us

Model 50 Injection Molding Machine Model 50 Description Bench top, hydraulically-operated injection molding machine Manual or semi-automatic vertical clamping and injection Uses self-clamping V-mold technology Plunger-type plasticizing system available in a variety of plunger diameters Plungers can be interchanged in minutes to offer maximum flexibility Self-contained hydraulic unit (requires no outside air source) Controlled by ABB motor starter Uses a solenoid-operated directional valve Independent relief valve and an oil-filled pressure gauge allow for precise injection pressure settings Employs a 2” bore hydraulic injection cylinder Control unit includes: Solid state timer Two auto-tune pyrometers (barrel and nozzle temperature zones) Power Options 220V, single phase 220V with center tap (house wiring) 208V, three phase 220V, three phase Model 50 Specs Specifications Plunger Diameter (Inches) Injection Volume (Inches3) Injection Pressure @ 2000 PSI Hydraulic Pressure (PSI) Max Shot Size (oz) 1/2 5/8 3/4 7/8 1 - 1/16 1.178 1.841 2.651 3.608 5.304 32,000 20,480 14,223 10,449 7,068 0.33 0.50 0.75 1.00 1.50 Cylinder Heater Capacity 1,050 Watts Nozzle Heater Capacity 150 Watts Injection Cylinder Bore 2.0 Inches Injection Cylinder Stroke 6.0 Inches Approx. Maximum Clamp Force 11.75 Tons Maximum Casting Area 6.0 in2 Mold Ejection Force 3,313 Pounds Hopper Capacity 12 Pounds Standard Mold Size (LxWxH) 7 x 2 x 3 Inches Rated Current @ 230VAC 20 Amps Approx. Machine Shipping Weight 550 Pounds Machine Footprint (W x D) 22 x 32 Inches (Specifications may change without notice) Model 50 Media Pictures Cylinder Hydraulic Valve Hydraulic Pump Electrical Encl... with Deluxe Sta...   Movies